NETBIOS HACKING

i hope you have enjoyed my previos article on "facebook hacking".you might have think that if there is a trick by which you can  get access to the pc of your girlfriend or play a prank on the friend.that would be really cool if you could do that.BUT HOW....???. dont worry i m here to tell you what to do for that and that is too easy,ONLY DO AS I SAY....!!!
this type of hack is known as netbios hacking .

STEP-BY-STEP NETBIOS HACKING PROCEDURE

step1 first download angry ip scanner
step2 since you have to find the target so first you should be knowing the range of ip adress in your network.
so Open command prompt and type "ipconfig" without the inverted commas.now it willshow something like this.

here you can see the ip adress 10.10.2.111.this is your ip adress.hence in the ip range of the angry ip scanner you should put the ip adress around your ip adress for e.g in the screenshot below if your ip adress is 10.10.2.01 then you should put the range from "10.0.2.01" to "10.0.2.15" and upto 10.0.2.255.


step3 now hit button in the right side of "start" button.it will ask you to put the port,since netbios work on port 139 hance put 139 and hit "start".

step4 now it will show all the ip adress with their port 139 open with green light in front of it.just note that ip adress.

step5- now open command prompt  and write this command
 net view \\10.0.2.19
The above is an example for operation using command prompt.”net view” is one of the netbios command to view the shared resources of the remote computer.Here “219.64.55.112″ is an IP address of remote computer that is to be hacked through Netbios.You have to substitute a valid IP address in it’s place.If succeeded a list of HARD-DISK DRIVES & PRINTERS are shown.If not an error message is displayed. So repeat the procedure 2 with a different IP address.

step6- after succeeding, use the “net use” command in the command prompt.The “net use” is another netbios command which makes it possible to hack remote drives or printers.

net use D: \\10.0.2.19\F

net use G: \\10.0.2.19\SharedDocs

net use I: \\10.0.2.19\Myprint

NOTE: In Examples 1,2 & 3, D:,G: & I: are the Network Drive Names that are to be created on your computer to access remote computer’s hard-disk.
NOTE: GIVE DRIVE NAMES THAT ARE NOT USED BY ANY OTHER DRIVES INCLUDING HARD-DISK DRIVES,FLOPPY DRIVES AND ROM-DRIVES ON YOUR COMPUTER.THAT IS IF YOU HAVE C: & D: AS HARD DIRVES, A: AS FLOPPY DIVE AND E: AS CD-DRIVE, GIVE F: AS YOUR SHARED DRIVE IN THE COMMAND PROMPT
F:,”SharedDocs” are the names of remote computer’s hard-disk’s drives that you want to hack. “Myprint” is the name of remote computer’s printer.These are displayed after giving “net use” command. “219.64.55.112″ is the IP address of remote computer that you want to hack.


step7-After succeeding your computer will give a message that “The command completed successfully“. Once you get the above message you are only one step away from hacking the computer.
Now open “My Computer” you will see a new “Hard-Disk drive”(Shared) with the specified name.You can open it and access remote computer’s Hard-Drive.You can copy files,music,folders etc. from victim’s hard-drive.You can delete/modify data on victim’s hard-drive only if WRITE-ACCESS is enabled on victim’s system.You can access files\folders quickly through “Command Prompt”.
NOTE: If Remote Computer’s Firewall Is Enabled Your Computer Will Not Succeed In Gaining Access To Remote Computer Through Netbios.That is Netbios Hacking Is Not Possible In This Situation.(An Error Message Is Displayed).So Repeat The Procedure 2,3 With Different IP Address.
HAPPY NETBOS HACKING

want more hacking just subscribe to my blog and read other articles  on hacking.